Home / Blog / Car Repair

Mercedes EQE Charge Port: What the Lights Mean (and Why the Cable Won't Unlock)

Mercedes EQE charge port with cyan status lights while charging, cable plugged in outdoors

On my Mercedes EQE the charge-port lights are not decoration. The legend printed inside the charge flap tells you whether the car is charging, finished, initiating, or unlocked for unplug. The cable lock lives on the car, not on the handle — so if you are using a Tesla-style charger, the button on that handle will not release this Mercedes.

I filmed this outdoors in the rain in southern Finland on 21 November 2026 on the same EQE I use for washer fluid top-ups and Michelin X-Ice North 4 winter tyres. What follows is what the flap says, what I did on camera, and the stuck-cable tips I mention — including reports from other owners that I have not confirmed on this car.

What the charge-port lights mean on the EQE flap

Open the charge flap and read the sticker on the inside. On my car that legend is how I read the LEDs around the inlet:

  • Blinking blue / cyan — it is charging. While that is showing, the cable is locked in place.
  • Constant / solid blue — charging would be complete.
  • Orange — initiating charging. In the restart demo it first blinks orange while initiating, then turns blue once charging starts. On camera that initiating colour looks like a deep orange-red; I am not inventing a separate “red = error” meaning from this video.
  • White — the charging lock is open. Safe to unplug. After a successful unlock I got a constant white light, and the cable pulled out easily.

The flap sticker also has a red bar / warning-icon row and other pictograms. I do not narrate a meaning for red in this clip, so I am not assigning one here.

Printed LED legend sticker on the inside of a Mercedes EQE charge flap
Flap legend on my EQE: blinking blue = charging, solid blue = complete, orange = initiating, white = lock open.
Mercedes EQE charge port with cyan LEDs lit while a cable is plugged in and charging
Blinking cyan / blue while charging — cable locked.
Close-up of cyan charge-port lights on a Mercedes EQE with the cable locked in
Close-up while charging: cyan lights, latch holding the plug.

The lock is on the car, not on the cable

The charging lock is on the car. To remove the cable, that latch has to unlock. Until it does, pulling on the handle is the wrong fight.

The cable in the video is what I call a Tesla charger. The handle has a button. That button would work only on a Tesla car. On this Mercedes it does nothing useful for release — you use the unlock control next to the EQE port instead.

Finger pointing at the button on a Tesla charging-cable handle plugged into a Mercedes EQE
Tesla-handle button: useful on a Tesla, not the unlock for this Mercedes latch.

Press the unlock button next to the port

On the EQE the unlock button sits next to the charge socket — below / beside the inlet — on the car, not on the cable. Press that button, wait for the lock to open, then pull the cable and close the flap.

Finger pressing the unlock button beside the Mercedes EQE charge inlet
Unlock button on the car, next to the inlet.
Mercedes EQE charge port showing a white status light after the cable lock opened
Constant white light: charging lock open, safe to unplug.
Mercedes EQE charge port with the cable removed and white lights still showing
Cable out. Close the flap when you are done.

Does the car need to be unlocked?

I would assume the car needs to be unlocked for this. In the demo the car was locked, and pressing the port button still unlocked the cable — maybe because I had the key in my pocket. Treat “car must be unlocked” as that assumption, with this caveat. I am not stating a hard Mercedes rule beyond what I saw.

Starting charging again: orange, then blue, then locked

When I plugged back in, the port first blinked orange while initiating, then went blue once charging started. At that point the cable was locked again.

Mercedes EQE charge port glowing orange while charging initiates after replugging
Initiating: orange first, then blue when charging is under way.

If the cable will not release

If you are stuck with a plugged-in cable, these are the things I recommend or pass on from other reports. I am marking reports as reports — I did not reproduce every one on this car.

  1. Reseat and press again. The cable may be in a bad position so it is not unlocking properly, and you may not hear the unlock sound. Push the cable a bit further in and press the port unlock button again.
  2. Frozen lock (reported). Some people have reported the locking mechanism freezing up in cold or wet weather.
  3. EQE / EQS software issue (reported / dealer path). There was also an EQE and EQS software issue around the charging lock. You cannot really see useful error codes for that on the car itself — ask a dealer whether a software update is required for the charging-locking software. To my understanding that update is not something you get over the air. I am not showing a dealer diagnosis here, and I am not claiming this car has that fault.
  4. Lock, then double-tap unlock (reported). Some have reported: if it is not unlocking, lock the car, double-tap unlock on the key, then press the port button again.
  5. Call Mercedes support if you are still stuck.
Mercedes EQE charge port in the rain with a cable plugged in while discussing stuck-cable tips
Stuck cable: reseat and press again first; other tips below are reports or dealer questions, not a confirmed fault on this car.

Manual emergency release — I could not find it

Cars usually have a manual unlock for the charge latch. On this EQE I am not sure where it is. I looked in the trunk / cargo area on the same side as the charger, near a flap there, expecting a manual unlock cable to be reachable — and I could not find it. I did not find it in the manual either.

On some Mercedes models you remove a screw, lift trim, and find the release. I did not locate or demonstrate that on this EQE. If you know where the EQE’s manual emergency release is, leave a comment on the YouTube video — I asked viewers the same thing.

There is also a factory Mercedes Rescue Card / Service Card QR sticker in the inner charge-door area. It shows some information, but it did not show how to get the cable out. In my opinion that sticker is more for rescue services than for this everyday unlock job.

Looking into the Mercedes EQE trunk side area near the charge-port side while searching for a manual unlock cable
Trunk-side search for a manual release on the charger side — I did not find one.

Practical tips from this demo

  • Read the flap legend before you guess at colours.
  • Blinking blue / cyan = charging and locked; white = lock open; orange = initiating.
  • Use the unlock button next to the EQE port. A Tesla handle button is the wrong control on this car.
  • After unlock, wait for white, then pull — do not fight a locked latch.
  • If unlock fails silently, push the plug in a little and press the port button again.
  • Treat frozen-latch reports, the lock-then-double-tap-key tip, and the EQE/EQS software update as reports or dealer questions unless you have confirmed them on your car.
  • Do not treat the Rescue Card QR as a personal cable-unlock guide.
  • I still do not know where the EQE manual emergency release is; comment on the video if you do.

Type 2 charging cables (Amazon examples — not the Tesla cable on camera)

The cable in the video is a Tesla-handle charger. The Amazon links below are LAPP Mobility Type 2 to Type 2 AC cables — examples of a Type 2 public/home-style cable, not the Tesla cable shown on camera. Via amazon.com they are pricey; I am linking them as role-similar Type 2 options with tag findiligent08-20, not as a claim that they are what I used in the rain.

LAPP Mobility 22 kW Type 2, 32 A, 3-phase, 7 m

LAPP Mobility Type 2, 22 kW, 5 m

I did not find a well-rated in-stock holder/cover link worth adding here.

FAQ

What do the Mercedes EQE charge-port lights mean?

Per the flap legend on my car: blinking blue / cyan means charging; solid blue means charging complete; orange means initiating; white means the charging lock is open. I am not assigning a meaning to the red legend icon from this video.

Why won’t the cable unlock when I press the Tesla handle button?

Because the lock is on the Mercedes, not on that cable. Use the unlock button next to the EQE charge inlet.

Do I need to unlock the car first?

I would assume so. In my demo the car was locked and the port button still released the cable — possibly because the key was in my pocket. Present that as an observed caveat, not a guaranteed rule.

What should I try if the cable is stuck?

Push the plug in a little and press the port unlock button again. Some owners report a frozen latch, a lock-then-double-tap-unlock key sequence, or an EQE/EQS charging-lock software update that a dealer would apply (not OTA, to my understanding). Call Mercedes support if you remain stuck.

Where is the manual emergency release on the EQE?

I do not know. I looked in the trunk on the charge-port side and in the manual and could not find it. I am asking readers and viewers to say if they know.

Are the Amazon LAPP cables the ones in the video?

No. The video shows a Tesla-handle charger. The LAPP links are Type 2 to Type 2 example cables on amazon.com (tag findiligent08-20), and they are expensive there.

Is this the same EQE as your other Homeneer posts?

Yes — the same car as Mercedes EQE Washer Fluid: The Hood Doesn’t Open and Michelin X-Ice North 4 on my Mercedes EQE.

Mercedes EQECharge portEV charging

Car RepairDIY